w w w . a d c . c o m ? + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 ? 1 - 8 0 0 - 3 6 6 - 3 8 9 1 spec sheet tracerlight ? connector identification system adcs innovative tracerlight ? connector identification system offers a quick and accurate method of identifying the termination point of optical patch cords. each end of a tracerlight patch cord features a flashing light source allowing technicians to visually trace individual patch cords from one end to the other without pulling or affecting the patch cord. the tracerlight power source is inserted into the tracerlight component on one end of the patch cord. this causes the led on each end to begin flashing rapidly. as a result, the distant end of the patch cord can be quickly and easily identified without interruption of service. the compact power source is composed of a lightweight, plastic flashlight body featuring two aa batteries and a printed circuit board (pcb). it provides approximately 80 hours of continuous service and features 1-hour auto-off. the end of battery life is indicated by a slowing of the blink rate. features: ? dramatically minimizes the risk of taking the wrong fiber out of service ? improves system turn-up speed and accuracy ? tracerlight patch cords meet all optical performance criteria of standard adc patch cords ? ideally suited for central offices, data centers and cross-connect patching ? 72% reduction in jumper turn-up times and 13% reduction in accidental down-time. tracerlight pays for itself again and again ? available in any standard length or connector style ? same functions, features and stringent environmental standards as adc's standard patch cords ? installed in the same manner as adc's standard patch cords ? easily pulled through adc's fiberguide ? fiber cable management system
7 / 0 7 ? 1 0 4 2 8 2 a e tracerlight ? 2 w w w . a d c . c o m ? + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 ? 1 - 8 0 0 - 3 6 6 - 3 8 9 1 tracerlight ? connector identification system specifications optical performance singlemode ultra polish connectors (upc) sc fc lc insertion loss (1310 and 1550 nm) 0.2 db max. 0.09 db typical 0.2 db max. 0.09 db typical 0.3 db max. 0.1 db typical return loss (1310 and 1550 nm) -57 db min. -57 db min. -55 db min. fiber recess 50 nm 50 nm -100 to +50 nm apex offset 50 m max. 50 m max. 50 m max. radius of curvature 10-25 mm 10-25 mm 10-25 mm singlemode angled polish connectors (apc) sc lc insertion loss (1310 and 1550 nm) 0.35 db max. 0.15 db typical 0.35 db max. 0.15 db typical return loss (1310 and 1550 nm) -65 db min. -65 db polished endface radius 5 - 15 mm 5 - 12 mm fiber recess -100 to +50 nm 50 nm apex offset 50 m 50 m endface angle 8? 0.5 8? 0.5 multimode ultra polish connectors sc lc insertion loss (1300 nm) 0.3 db max. 0.3 db max. return loss (1300 nm) -20 db min. -20 db max. item specifications eia/tia test item specifications eia/tia test temperature shock fotp-3 cable flex fotp-1a humidity fotp-5 cable retention fotp-6 temperature life fotp-4 cable twist fotp-36 mating durability fotp-21 impact fotp-2 vibration fotp-11 mechanical an d e nvironmental characteristics every patch cord manufactured by adc is designed to pass rigorous qualification testing that includes: eia/tia industry standards according to fiber optic test procedures (fotp). 1 assembly length simplex tracerlight assembly details tracerlight simplex assembly assembly length 1 1 assembly length dualzip tracerlight assembly details tracerlight duplex assembly assembly length
7 / 0 7 ? 1 0 4 2 8 2 a e tracerlight ? 3 w w w . a d c . c o m ? + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 ? 1 - 8 0 0 - 3 6 6 - 3 8 9 1 tracerlight ? connector identification system simplex ordering examples ftl-7/7-d003m: singlemode simplex patch cord with sc connectors on both ends, 3 meters in length. ftl-9/9-a005m: multimode simplex patch cord with sc connectors on both ends using 50/125 m fiber, 5 meters in length. connector style (second end) singlemode 7 sc ultra polish e sc angled polish 2 fc ultra polish c lc ultra polish m lc angled polish multimode 9 sc p lc catalog number ftl- __ / __ - __ __ __ __ m connector style (first end) singlemode 7 sc ultra polish e sc angled polish 2 fc ultra polish c lc ultra polish m lc angled polish multimode 9 sc p lc cable type (1.7 mm) singlemode d standard singlemode (yellow) p reduced bend radius singlemode (blue) multimode a 50/125 m multimode (orange) j 50/125 m laser optimized to 300 m multimode (aqua) g 62.5/125 m multimode (orange) assembly length 001-020 1-20 meters in 1 meter increments 025-065 25-65 meters in 5 meter increments 070-150 70-150 meters in 10 meter increments singlemode or multimode patch cords (simplex and duplex) ordering examples ftl-7cz010m: singlemode dual zip patch cord with sc to lc connectors, 10 meters in length. ftl-ppe010m: multimode dual zip patch cord with lc connectors on both ends using 50/125 m fiber, 10 meters in length. duplex connector style (second end) singlemode 7 sc ultra polish e sc angled polish 2 fc ultra polish c lc ultra polish m lc angled polish multimode 9 sc p lc catalog number ftl- __ __ __ __ __ __ m connector style (first end) singlemode 7 sc ultra polish e sc angled polish 2 fc ultra polish c lc ultra polish m lc angled polish multimode 9 sc p lc cable type (1.7 mm) singlemode z dual zip singlemode (yellow) r reduced bend radius dual zip singlemode (blue) multimode e 50/125 m dual zip multimode (orange) k 50/125 m laser optimized to 300 m multimode (aqua) h 62.5/125 m dual zip multimode (orange) assembly length 001-020 1-20 meters in 1 meter increments 025-065 25-65 meters in 5 meter increments 070-150 70-150 meters in 10 meter increments other connector styles are available upon request. please contact adc technical assistance center.
website: www.adc.com from north america, call toll free: 1-800-366-3891 ? outside of north america: +1-952-938-8080 fax: +1-952-917-3237 ? for a listing of adcs global sales office locations, please refer to our website. adc telecommunications, inc., p.o. box 1101, minneapolis, minnesota usa 55440-1101 specifications published here are current as of the date of publication of this document. because we are continuously improving our products, adc reserves the right to change specifications without prior notice. at any time, you may verify product specifications by contacting our headquarters office in minneapolis. adc telecommunications, inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. products or features contained herein may be covered by one or more u.s. or foreign patents. an equal opportunity employer 104282ae 7/07 revision ? 2007 a d c telecommunications, inc. all rights reserved spec sheet tracerlight power source ftl-ps description catalog number tracerlight power source ftl-ps tracerlight plus launch cable (for use with a tone generator) ftl-tglc o r d e r i n g i n f o r m a t i o n
|
